Published at Friday, November 09th 2018. by Emma Harrell in Patio Table.
How to put together patio table how to assemble patio table. The first thing you want to do is open the box to make sure all of the parts are there and that nothing is damaged. It is all packed very nicely. I have four legs and they are individually wrapped, so they don't scratch. The tabletop is wrapped to make sure it didn't scratch, either 2 leg support and I have the directions and all the little parts.
The only part is not included, is a Phillips' head. Screwdriver the directions are clear because it says to put the tabletop part number one upside down on a carpet and then insert legs number two say you know which one it is and use screws shown number four because there are two different kinds of screws. So it's clear which part you're supposed to use one of the legs.
It has a little hole here, see you line this up slip it in the bracket, it's sort of rubbery and then use supplied screw. Do that for all 4 legs now hook the middle center support - and there are slots here, slip it into the slot, then you take a bolt and a washer see how there's a hole in each corner. This is the hole that you screw to the bracket. Make sure everything is the way you want it and then you are going to install the bolt covers. They are rubbery plastic and stick them over the head of the bolts, nice and sturdy.
Any content, trademark’s, or other material that might be found on the marxistoutlook.com website that is not marxistoutlook.com’s property remains the copyright of its respective owner/s. In no way does marxistoutlook.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 marxistoutlook.com. All Rights Reserved.